Other Setup Options

■Keystone

Settings Æ Keystone

Adjusts the shape of the image, if the left and right sides are not parallel after tilting the projector up or down at the screen (see page 25).

■Projection

Settings Æ Projection

Inverts the image for overhead projection.

■Direct Power On

Settings Æ OperationÆ Direct Power On

Sets projection to start when the main power switch is turned on, without pressing the On button on the remote control or the Power button on the projector.

Note: When direct power on is enabled, power surges that occur after a power outage can cause the projector to turn on.

■Video Signal

Settings Æ Input SignalÆ Video Signal

Leave this setting on Auto so the projector can automatically interpret the format, such as NTSC or PAL (for standard TV formats).

■Input A

Settings Æ Input SignalÆ Input A

Change this setting to match the type of equipment connected to the Input A port.

For component video, select Auto to let the projector automatically interpret the signal; or select YCbCr or YPbPr to manually select your video equipment’s signal.

■Trigger Out

Settings Æ Operation Æ Trigger Out

Turn on this setting if you want the Trigger out port to output a 12-volt signal while the projector is operating. You can use this to raise or lower your projection screen.

Making Detailed Adjustments 45