EPSON Stylus COLOR 800

5.Set the Memory Requirements to 2000 or 3000, depending on your system’s available RAM.

6.While you’re printing, click the EPSON Monitor2 icon on the Application menu at the right end of the menu bar. You see a dialog box like the following:

Job currently printing

Jobs queued for printing

4.If you want to change printer messages and warnings, click the Configuration button. You see the following dialog box:

Printing stops when these messages appear.

Printing continues when these messages appear.

7.You can select a job and cancel it or just use this window to track the printer’s progress.

Using the Macintosh Status Monitor

You can use the Status Monitor to check the level of ink in your printer and to control the way your software warns you about printer problems. Follow these steps:

1.Choose Print from the File menu or click the Print button in your application. You see the printer settings dialog box.

2.Click the Utility button.

3.Click the StatusMonitor icon. The software checks the amount of ink remaining in the printer and displays the StatusMonitor window:

Click to control messages

Click to recheck ink level.

and warnings.

 

5. Choose the options you want and click OK.

Network Printing on a PC

You can use your printer on a network under Windows 95 or other network operating systems. First you need to set up your printer, using either your printer software’s built-in network support or the network’s LPT port redirection functions.

Note:

If you need to install a network interface board in your printer, see page 17 for instructions.

When you use your printer’s built-in support, the Spool Manager sends journal files from your computer to a shared directory on a network server. These files can then be printed from another computer attached to the printer.

First you need to run Spool Manager and identify the shared directory to use for journal files. After you set this up on the computer connected to the printer (the host system), you need to perform a similar procedure on each remote system on the network.

Under Windows 95, you also need to specify the port and network path to the printer.

Setting Up the Host System

Follow these steps to set up the computer connected to the printer:

1.Create an icon for the EPSON Spool Manager (EPSPLMGR.EXE in the \WINDOWS\SYSTEM folder or directory).

2.Place this icon in the Startup folder.

3.Open the Spool Manager window as described on page 7.

10 - EPSON Stylus COLOR 800

1/97