If you’ve connected a computer and the image doesn’t look right, or it doesn’t fit properly on the screen, press the Enter button on the projector or the Enter/Auto button on the remote control. This automatically resets the projector’s tracking, sync, resolution, and position settings. You must be projecting a computer image for this button to have any effect. Additionally, if the Auto Setup option in the Signal menu is set to Off, the Auto function will not work. See page 55.
Adjusting the Volume
You can use the Vol- and Vol+ buttons on the remote control to increase or decrease the volume for the projector’s
You can also use the buttons on the projector to control the volume. Press the 
button to increase the volume, or the 
button to decrease it. A volume gauge appears on the screen while the volume is being adjusted.
Volume control buttons
note
You can also adjust the volume using the projector’s Settings menu. See page 56 for details.
You must adjust the volume separately for each input source.
Projecting 41