3.Use the screwdriver included with the replacement lamp or a #2 Phillips-head screwdriver to loosen the screw holding the lamp cover (the lamp cover is located on top of the projector).

4.Slide the cover out, then lift it off.

5.Use the screwdriver to loosen the two screws holding the lamp in place. (You can’t remove the screws.)

6.Hold the lamp as shown and pull it straight out.

Don’t remove these screws

note

The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.

Maintenance and Transportation 73