Introduction

Your EPSON PowerLite 7850p projector now lets you project wirelessly from an Apple® Macintosh® computer equipped with an AirPort® or AirPort Extreme (802.11b or 802.11g) wireless network interface. This supplement includes the following:

■System requirements for using the new wireless software

■Software installation instructions

■How to set up your Macintosh for wireless projecting

■How to connect to the projector

When you’ve finished with the instructions in this supplement, see the User’s Guide for information about creating projector groups, receiving e-mail alerts, or using other networking features supported by your projector.

System Requirements

Before you install the software, make sure your Macintosh meets the following requirements for projecting wirelessly:

■Power Macintosh® series, iMac,® PowerBook,® or iBook® series system

■Mac OS X 10.2.4 or above

■AirPort (802.11b) or AirPort Extreme (802.11g) wireless network interface

■At least 256MB of RAM

■At least 128MB of free hard disk space

■SVGA (800 ⋅ 600) or better display adapter and monitor

note

If you are using AirPort Extreme, you must set the Wireless mode to 802.11b only in the AirPort ® Admin Utility. See your AirPort documentation, or contact Apple technical support for help.

3