Setting Up Your Macintosh

Before you begin, do the following:

■Configure your projector for wireless projecting; see the User’s Guide for instructions.

■Insert the EPSON wireless (802.11b) card in the projector and start EasyMP.™ See the User’s Guide for details.

Follow these steps to set up your Macintosh for wireless projecting:

1.From the Apple pull-down menu, select System Preferences. Then double-click the Network icon. You see the Network Settings window.

2.Select Network Port Configuration in the Show pull-down menu:

note

Don’t set your projector to Channel ad hoc mode. This mode is not supported for Macintosh.

Select Network Port Configurations here. . .

then select AirPort

3.Under Port Configurations, select AirPort.

4.Click Apply Now. Then close the window.

note

If you don’t need the other network ports, disable them by deselecting their check boxes. If more than one network port is enabled, the projector software warns you to turn off AirPort when you first connect to the projector. Disregard this message.

5