4 Load Paper
1.Open the output tray extensions. Slide the left edge guide right until it is a little wider than your paper.
2.Load a stack of plain paper with the printable side up and place it against the right edge guide. Then slide the left edge guide up against the paper’s left edge. Don’t load paper higher than the arrow on the guide.
Load paper only up to this arrow
Slide paper against the right edge guide
5 Connect the Printer
Make sure your cable meets the specifications listed in Printer Basics.
Connecting to a USB Port (Recommended connection, for Windows 98® or iMac™ only)
1.Turn off the printer and computer.
2.Connect square end of the USB cable to your printer’s USB connector and the other end to your computer’s USB connector or USB hub.