6.Click Install Printer Driver, then follow the on-screen instructions to install your printer driver. You also install Status Monitor 2. When you restart your system after installing the printer software, leave your CD-ROM in the drive.

7.Continue with “Install Your Bonus Software and Electronic Manual” on the back of this card.

Windows 98 with USB Connection

1.Make sure your printer and computer are connected and turned off. Then turn on your computer and wait until you see the Windows 98 desktop icons.

2.Turn on your printer. You see the Add New Hardware Wizard screen.

3.Insert your printer software CD-ROM and click Next.

4.At the next screen, select

Search for the best driver for your device and click Next. Select Specify a location and type

D:\WIN98 (where D is your CD-ROM drive letter). Then click Next.

5.The Add New Hardware Wizard now displays EPSON USB Printer; click Next. The installer copies the USB printer files to your system. At the next screen, click

Finish.

6.Windows 98 detects your printer; click Next to install your printer driver.

7.At the next screen, select

Search for the best driver for your device and click Next. Select Specify a location and, if necessary, type D:\WIN98 (where D is your CD-ROM drive letter). Then click Next.

8.Follow the on-screen instructions to install your printer driver. Be sure to click the Yes radio button to set your printer as the Windows default printer. At the last screen, click Finish.

9.Now you’re prompted to install Status Monitor 2. If you’re asked to specify a location, type D:\DRIVERS\WIN98 (where D is your CD-ROM drive letter). Then click OK.