EPSON Stylus COLOR 900
Transporting the Printer
If you move your printer some distance, you need to prepare it for transportation in its original box. Follow these steps:
To avoid damage, always leave the ink cartridges installed when transporting the printer.
Be sure to remove the tape used in step 4 after installing the printer in its new location.
1.Turn on the printer and wait until the print head locks in the far right position. Then turn off the printer.
2.Unplug the power cord from the electrical outlet. Then disconnect the printer cable from the printer.
3.Remove any paper from the printer and remove the paper support.4.Open the printer cover. Secure the ink cartridge holder to the printer with tape as shown, then close the printer cover.
5.Push in the output tray extensions and close the tray.6.Repack the printer and attachments in the original box using the protective materials that came with it. See the unpacking sheet that was packed with your printer.
Be sure to keep the printer level as you transport it. If you notice a decline in print quality after transporting the printer, clean the print head (see page 10); if output is misaligned, align the print head (see page 11).
Related Documentation
| EPSON Stylus COLOR 900 Service | |
| Manual |
| EPSON Stylus COLOR 900 Parts Price | |
| List |
| EPSON Stylus COLOR 900 Printer | |
| Basics |
| EPSON Stylus COLOR 900 Start Here | |
| ESC9001298 | EPSON Stylus COLOR 900 Manual |
| (Adobe Acrobat format, pdf) |
12 - EPSON Stylus COLOR 900 | 1/99 |