5
6
7
Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button on the remote control).
The enlargement setup screen will be displayed.
User's Logo Capture
Do you use this image?
YesNo
:Return :Select :Execute
Select the enlargement rate and then press the [ (Enter)] button on the main unit (the [Enter] button on the remote control).
The screen to confirm saving will be displayed.
User's Logo Capture
Set the zoom rate.
zoom rate :
100% 200% 300%
:Return :Select :Execute
Select [Yes] and then press the [ (Enter)] button on the main unit (the [Enter] button on the remote control).
The image will be saved. Wait until the [saving completed] screen is displayed.
User's Logo Capture
Do you save the user's logo?
YesNo
If you save it,
the previous user's logo will be overwritten.
:Return :Select :Execute
Point
·A certain amount of time is required for the saving process. Do not operate the projector or connected equipment while saving is in progress. Failure to observe this may result in defects.
·The image size that can be registered is 400 x 300 dots.
·The display size will be amended when the video image is being projected.