PictureMate Snap (PM 240)
Changing How Many Photos Display on the Screen
After inserting a memory card, you can change how many photos are displayed on the photo viewer screen. Press the 
Display button to switch between 1, 6, and 15 photos. You can also select whether a photo displays with or without the guide (the information bar near the bottom of the photo).
5.Select 90 degrees, 180 degrees, or 270 degrees (or select
Do Not Rotate). Your photo is rotated on the screen:
Identifying Screen Icons
When you make a change to your photos, an icon appears on the screen next to your photo to indicate the change. (If
necessary, press 
Display to view one photo per screen and show the icons.)
Icons showing selected settings
The following icons are used:
Frame or decoration is added
Cropping is applied
Color effect is applied
Color correction is applied
Date stamp is turned on
Rotating Photos on the Screen
You can rotate a photo on PictureMate’s photo viewer screen. This does not affect how the photo prints, only how you see it on the screen.
1.Select the photo you want to rotate.
2.Press Menu.
3.Press 
or 
to highlight Edit, then press OK.
4.Press 
or 
to highlight Rotate, then press OK.
6. Press OK.
Saving Power
When PictureMate is not in use, the photo viewer screen goes dark after 13 minutes. Press any button to turn it back on.
Printing
PictureMate can print photos from these devices:
❏Your digital camera’s memory card (as described here)
❏A PictBridge®- or
❏A
❏Your computer
❏An external CD drive, Zip disk, or flash memory (thumb) drive
See the Basics book or the
Make sure your image files meet these requirements:
❏JPEG files or uncompressed Tiff files only
❏Resolutions ranging from 80 × 80 to 9200 × 9200 pixels
Note: PictureMate supports Exif Print image enhancement features. See your camera manual to see if this feature is included on your camera.
PictureMate does not support
PictureMate recognizes and prints the first 999 photos on your memory card or device.
8/06 | PictureMate Snap (PM 240) - 5 |