PictureMate Snap (PM 240)

Mechanical

Paper path

 

 

 

Sheet feeder, top entry

 

 

 

 

 

 

Sheet feeder capacity

 

20 sheets

 

 

 

 

 

 

Dimensions

 

 

 

Storage

 

 

 

 

Width: 8.5 inches (215 mm)

 

 

 

 

Depth: 6.0 inches (152 mm)

 

 

 

 

Height: 5.7 inches (145 mm)

 

 

 

 

Printing

 

 

 

 

(with paper support and output tray open)

 

 

 

 

Width: 8.5 inches (215 mm)

 

 

 

 

Depth: 13.3 inches (339 mm)

 

 

 

 

Height: 10.3 inches (261 mm)

 

 

 

 

 

 

Weight

 

 

 

5.3 lb (2.4 kg) without photo cartridge,

 

 

 

 

AC adapter, or optional battery

 

 

 

 

 

 

Printable area

 

 

 

Border printing: 0.12 inch (3 mm) margin on

 

 

 

 

 

all sides of the paper

 

 

 

 

Borderless printing: no margins

 

 

 

 

 

 

Electrical

 

 

 

 

 

 

 

 

 

 

Input voltage range

 

110 to 120 V or 220 to 240 V

 

 

 

 

Power consumption (approximate)

 

 

 

 

 

Printing

 

 

19.0 W

 

 

 

 

 

Sleep mode

 

 

4.0 W

 

 

 

 

 

Powered off

 

 

0.4 W

 

 

 

 

Note: Check the label on the bottom of PictureMate for voltage

information.

 

 

 

 

 

AC Adapter

 

 

 

 

 

 

 

 

 

Model

 

 

 

 

A381H

 

 

 

 

 

 

Rated voltage

 

 

 

 

AC 100 to 240 V

 

 

 

 

 

Input voltage range

 

 

AC 90 to 264 V

 

 

 

 

 

 

Rated frequency

 

 

 

 

50 to 60 Hz

 

 

 

 

 

Input frequency range

 

 

49.5 to 60.5 Hz

 

 

 

 

 

 

Rated current

 

 

 

 

0.4 to 0.8 A

 

 

 

 

 

Rated electrical power

 

 

42 W

 

 

 

 

 

 

Output

 

 

 

 

20 VDC, 1.68 A

 

 

 

 

 

Environmental

 

 

 

 

 

Temperature

Operation: 50 to 95 °F (10 to 35 °C)

 

Storage: –4 to 140 °F (–20 to 60 °C)

 

1 month at 104 °F (40 °C)

 

 

Humidity

Operation: 20 to 80% RH

 

Storage (in shipping container): 5 to 85% RH (without

 

condensation)

 

 

 

 

 

 

Memory Card Slots

Card slots

CF Type II card slot

 

Compatible with “CF+ and

 

 

 

 

CompactFlash

 

 

 

 

Specification 2.0”

 

 

 

 

 

 

Sony Memory Stick®/

 

Compatible with “Memory

 

MemoryStick PRO/

 

Stick Standard version

 

Duo (requires adapter)

 

1.40-00”

 

card slot

 

Compatible with “Memory

 

 

 

 

Stick Standard Memory

 

 

 

 

Stick PRO Format

 

 

 

 

Specifications version

 

 

 

 

1.01-00”

 

 

 

 

 

 

SD(Secure Digital)/

 

Compatible with “SD

 

MMC

 

Memory Card Specifications

 

(MultiMediaCard) card

 

/ PART1. Physical Layer

 

slot

 

Specification Version 2.0”

 

 

 

 

Compatible with

 

 

 

 

“MultiMediaCard System

 

 

 

 

Specifications Version 3.31

 

 

 

 

cards”

 

 

 

 

 

 

xD-Picture Cardslot

 

Compatible with

 

 

 

 

“xD-Picture Card Card

 

 

 

 

Specification Version 1.20

 

 

 

 

Type M Card/Type H Card”

 

 

 

 

 

Voltage

3.3 V

 

requirements

3.3 V/5 V combined use

 

 

Maximum current is 500 mA

 

 

 

 

 

Computer USB Interface

 

 

 

 

Connectivity

 

Universal Serial Bus Specifications Revision 2.0

 

 

Universal Serial Bus Specifications Revision 1.1

 

 

 

Bit rate

 

480 Mbps (High speed device)

 

 

 

 

Connector type

 

USB Series B

 

 

 

 

 

Data Encoding

 

NRZI

 

 

 

 

Recommended

 

Less than 6 feet (1.8 meters)

cable length

 

 

 

 

 

 

 

External Device Interface

 

 

 

 

Connectivity

 

Universal Serial Bus Specifications Revision 2.0*

 

 

 

Bit rate

 

480 Mbps (High speed device)

 

 

 

 

Connector type

 

USB Series A

 

 

 

 

 

Data Encoding

 

NRZI

 

 

 

 

Recommended

 

Less than 6 feet (1.8 meters)

cable length

 

 

 

 

 

 

 

 

 

* Not all USB devices are supported.

Safety Approvals

Safety

UL 60950-1

 

CSA C22.2 No. 60950-1

 

 

EMC

FCC part 15 Subpart B class B

 

CSA C108.8 Class B

 

 

2 - PictureMate Snap (PM 240)

8/06