PictureMate Snap (PM 240)

Printing Individual Photos

If you have many photos on your camera’s memory card, you can select just the ones you want to print.

1.After inserting a card, press or to view your photos.

2.When you see a photo you want, press OK to select it for printing.

The selected photo is highlighted orange. If you’ve set the screen to display one photo at a time, an orange frame shows you the area that will print.

Note: If you want to edit your photo, see the Basics book for details.

3.To print more than one copy, press OK to increase the number of copies.

(Press Copy - to decrease the number using the left selection button under the photo viewer screen.)

4.To select more photos, press or to view a photo and press OK to select it. Repeat step 3 to select more copies, if necessary.

5.To preview your photos, press Print Preview. (Or skip directly to step 8 to print your photos.)

6.Press or to review your selected photos. If you change your mind, press the Back button.

7.Press Layout to select the layout of your photos on the paper. (For more information, see page 8.)

8.Make sure you have enough paper loaded, then press

Print to start printing.

Tip: You can check the total number of prints at the top of the screen before printing.

Printing All Photos

You can print all the photos on your camera’s memory card, and select the number of copies to print of each photo.

1.After inserting a card, press Select All. (Select All is the left selection button under the photo viewer screen.)

Press here to choose Select All

The selected photos are highlighted orange.

2.If you want more than one copy of each picture, press OK to increase the number of copies.

(Press Copy - to decrease the number using the left selection button under the photo viewer screen.)

3.Press Proceed.

4.To change the number of copies of an individual photo,

press or to select the photo. Then press OK to increase the number, or Copy - to decrease it.

5.To preview your photos, press Print Preview. (Or skip directly to step 7 to print your photos.)

Press or to review your selected photos. If you change your mind, press Back.

6.Press Layout to select the layout of your photos on the paper. (For more information, see page 8.)

7.Make sure you have enough paper loaded, then press

Print to start printing.

Note: If your card has more than 20 photos, you will need to reload paper while printing. Load a maximum of 20 sheets at a time. When you see a message that paper is out, load more paper and press OK to continue printing. If you need to cancel printing, press Cancel.

6 - PictureMate Snap (PM 240)

8/06