Installing the Software 1-5
R4C4410
Rev. C
A5 size INSTALL.FM
2/14/00 Pass 3
R
Proof Sign-off:
BLE H.Kato E.Omori
F.Fujimori
SEI M.Kauppi
1
Connecting to a Macintosh
You can connect the camera to a Macintosh with a
Macintosh serial cable. Follow the steps below.
Note:
To connect to a Macintosh with a USB cable, see “Using
the USB cable” on page 1-2.
1. Make sure the camera and your computer are
turned off.
2. Plug the serial cable connector into the modem or
the printer port on your computer.
3. Open the connector cover on the side of the
camera. Insert the other end of the cable to the
interface connector. Make sure the shape of the
connector fits the interface connector.
Macintosh serial cable
connector cover
PhotoPC 800
PhotoPC 850Z
connector cover