Using Continuous Paper

Setting the top of form position

You may need to set the top of the form to a certain position for printing on ready-made forms.

To set the top-of-form position at the third line of the paper, for example, mark the paper 4.1 inches (105 mm) above the perforation. Then load the paper and align this mark with the mark on the tractor unit, as shown below. The third line (0.42 inches or

10.6mm) below the perforation becomes the top-of-form position.

You may have to experiment with setting the top of form position several times to get this adjustment just right.

Paper Handling 2-11