Epson AVR-687 manual 16

ENGLISH

Connecting Other Sources

Cable indications

The hookup diagrams on the subsequent pages assume the use of the following optional connection cables (not supplied).

		Audio cable			Video cable
A	Analog connections (Stereo)		F	Video connections
	(White)	L	L	(Yellow)
	(Red)	R	R	Video cable (75 Ω/ohms video pin-plug cable)
		Pin-plug cable	G	S-Video connections
B
	Analog connections (Monaural, for subwoofer)
					S-Video cable
		Pin-plug cable	H	Component video connections
C	Digital connections (Coaxial)
				(Green)			(Y)
	(Orange)			(Blue)			(PB/CB)
		Coaxial cable (75 Ω/ohms pin-plug cable)		(Red)			(PR/CR)
D	Digital connections (Optical)			Component video cable
					Signal direction
		Optical fiber cable		Audio signal
E
	Speaker connections			IN	OUT	OUT	IN
				Video signal
				IN	OUT	OUT	IN
		Speaker cable

The video conversion function

With the AVR-687, the Video signal and the S-Video signal which were inputted are mutually converted. And also the Video signal and the S- Video signal which were inputted are converted into a higher quality.

The flow of the video signals.

(Component Video	(Component Video
terminals)	terminals)
(S-Video terminal)	(S-Video terminal)
(Video terminal)	(Video terminal)
This unit’s input	This unit’s output
terminals	terminals

NOTE:

•Do not plug in the power supply cord until all connections have been completed.

•When making connections, also refer to the operating instructions of the other components.

•Be sure to connect the left and right channels properly (left with left, right with right).

•Do not bundle power cords together with speaker cables. Doing so could result in humming or noise.

13

ENGLISH