Printing From Start to Finish 23
Note:
For color management instructions, see http://www.epson.com/SPR3000Profiles.
For more information about print settings, click Help or see your online User’s
Guide.
7. Choose the paper Source in which you loaded your paper:
■Sheet: for sheets of paper loaded in the sheet feeder.
■Roll Paper: for photos or panoramics up to 27 inches (68.6 cm) long. If
desired, click Print page frame to print a cutting guideline around each
photo.
■Roll Paper (Banner): for photos or banners over 27 inches (68.6 cm)
long. If desired, click Save Roll Paper to feed small amounts of roll
paper between each banner.
■Front - Fine Art: for a sheet of compatible paper loaded in the manual
feed tray (see page 8 for loading instructions).
■Front - Poster Board: for thick media loaded in the manual feed tray
(see page 14).
■CD/DVD: for a disc loaded in the CD/DVD t ray (see p age 30 for printing
instructions).
8. Select the paper Size setting for the paper you loaded.
If you loaded roll paper, create a custom paper size. Select User Defined in
the Size menu, then click the User Defined button. Type a name for your
custom size. For the Paper Width, enter 12.95 for Super B-size rolls. For the
Paper Height enter the desired length up to 44 inches. Click Save, click OK,
then select your custom paper size in the Size menu.
Note:
For roll paper, make sure the maximum width of your photo is 13 inches to fit in the
width of your roll paper (set the margins to 0 in your application software).
9. If you’re printing borderless photos, select Borderless, if available. To adjust
the borderless expansion setting click Expansion.
10. To reduce or enlarge your printout or print double-sided, click the Page
Layout tab and select settings as necessary. (Click Help or see your online
User’s Guide for details.)
11. Click OK to save your settings.
12. Click OK or Print to start printing.