Red | error light | Your paper ran out, ink ran out, or paper is jammed. You may | |
is on |
| also see a message on your screen. | |
|
| If paper is out, load more paper, then press the | |
|
| maintenance button to resume printing. | |
|
| If paper is jammed, press the | maintenance button to eject |
|
| the paper. If that doesn’t work, turn off the printer, open the | |
|
| cover, and pull the paper out from the front, including any torn | |
|
| pieces. Then turn on the printer, reload paper, and press the | |
|
| maintenance button. |
|
|
| If you see an ink out message on your screen, you need to | |
|
| replace one of your ink cartridges as described in Replacing an | |
|
|
| |
|
|
| |
Red | error light | One of the ink cartridges is low. Make sure you have a | |
flashes |
| replacement cartridge. To determine which cartridge is low, | |
|
| check the ink level as described in Checking the Ink Supply. | |
|
|
| |
Green | power | Paper may be blocking movement of the print head. Turn off | |
light is off and red | the printer, open the cover, and remove any jammed paper or | ||
error light is on | other foreign objects. Then turn the printer on again. If the lights | ||
|
| are still on, contact your dealer or EPSON; see Where To Get | |
|
| Help for contact information. |
|
|
|
| |
Green | power | The printer may have an internal error. Turn off the printer, wait | |
light and red | a few seconds, and turn it on again. If the lights are still flashing, | ||
error light flash | contact your dealer or EPSON; see Where To Get Help for | ||
|
| contact information. |
|
|
|
| |
Green | power | One of your ink cartridges is installed incorrectly. Follow the | |
light and red | instructions in Removing and Installing Ink Cartridges to reinstall | ||
error light are | the cartridge. |
| |
on after installing an |
|
| |
ink cartridge |
|
| |
|
|
|
|
Running a Printer Check
You can run a printer check to determine whether a problem comes from the printer itself or some other source. The printer check also shows how much black and color ink you have left.
1.Make sure both the printer and computer are turned off. Then disconnect the USB cable from the printer.
38