Epson C82, C70 installation manual Ill. Installation Procedures, Replace the air balance plugs

1.Check printer status to see whether it is normal or not, and check its mechanics for smooth and any damage.

2Enter nozzle test option (2-1), print nozzle test sheet to see whether nozzle is normal (2-2,2-3).

Pic. 2-1 Pic. 2-2, 2-3

3. If printer is alright, please print a picture to see the result.

Ill. Installation Procedures

1.Remove ink from the air balance tube

Place the system on the table, check if there is any ink in each of the air balance tube. If yes, you need to remove the ink in the balance tubes by the following steps:

1)Pull out the sealed plug of the balance tube (3-1-1).

2)Use the injector to draw all ink out.

3)Put the sealed plug back.

4)Put the sealed plug back.

4)Pull refill plug out.

5)Inject ink to the ink tanks according to their color.

6)Put refill plug back.

7)Check all the plugs to make sure they are completely sealed.

Pic. 3-1-1 Pic.3-1-2

2. Replace the air balance plugs

2 INSTALLATION MANUAL ON CISS FOR PRINTER EPSON C82/C80/C70