Epson C82307, C823088 5 . Handshaking, Table 15. Handshaking

5 . HandshakingTable 15. Handshaking

		Using	DTR	Using X-on/X-off
		protocol		protocol
RS-232D	The signal at pin No. 20 is			Data transmitted from pin
	as follows;			No. 2 is controlled as
	MARK-data		transfer	follows;
	disabled			X-on (11H)—data transfer
	SPACE-data transfer			enabled
	enabled			X-off (13H)—data transfer
	(Signal	polarity can be		disabled
	inverted by DIP-switch
	setting.)
RS-422A	The signal at pin No. 11			Data transmitted by the
	with respect to pin No. 13			differential voltage of pin
	is:			No. 9 to pin No. 10 is
	MARK-data		transfer	controlled as follows:
	disabled			X-on (11H)—data transfer
	SPACE-data		transfer	enabled
	enabled			X-off (13H)—data transfer
	(Signal polarity can be			disabled
	inverted	by DIP switch
	setting.)
Current Loop	The impedance between			Data transmitted by the
	pin No. 17 and pin No. 24			change of the impedance
	is as follows;			between pin No. 17 and
	LOW (MARK)—data			pin No. 24 is controlled as
	transfer	disabled		follows;
	HIGH (SPACE)-data			X-on (11H)—data transfer
	transfer	enabled		enabled
	(Signal	polarity can be		X-off (13H)—data transfer
	inverted by DIP-switch			disabled
	setting.)

24