3.If TCP/IP appears in the list of installed network components on the Configuration menu, TCP/IP is already installed, and you can skip to “Installing EPSON Status Monitor 2” on page 1-8.

If TCP/IP does not appear in the list of installed network components, click Add.

4.Click Protocol and the Add button.

5.Select Microsoft from the Manufacturers list and TCP/IP from the Network Protocols list. Then click OK.

6.Click OK on the Network menu and follow any on-screen instructions to enable TCP/IP, and go to “Installing EPSON Status Monitor 2” on page 1-8 when finished installing TCP/IP.

NT 3.51:

Windows NT 3.51 comes with LPR and TCP/IP, so all you need to do is select Microsoft TCP/IP Printing in the Network Settings dialog box, as described below.

1.Double-click the Network icon in the Control Panel to open the Network Settings dialog box. Click Add Software.

Getting Started 1-5