PROTOCOLS
The protocols that must be installed to run EPSON Status Monitor 2 vary depending on your operating system and printer type. The following table divides printers into two categories: LPR printers, which use TCP/IP (generally in a Windows NT network environment); and NetWare printers, which use Novell’s IPX/SPX protocol in a NetWare environment. Use this table to determine what protocols you need to install according to your operating system and printer type, then see the corresponding section for your operating system.
| LPR Printer (TCP/IP) | NetWare Printer (IPX/SPX) |
| ||
|
|
|
|
| |
Windows 95 | TCP/IP & EPSON1 | NetWare3 |
| ||
|
|
|
|
| |
Windows NT 3.51 | TCP/IP & LPR2 | NetWare3 |
| ||
|
|
|
|
| |
Windows NT 4.0 | TCP/IP & LPR2 | NetWare3 |
| ||
|
|
|
|
|
|
EPSON1 = EPSON TCP/IP Printing protocol |
|
|
|
| |
LPR2 = Windows NT LPR protocol |
|
|
|
| |
NetWare3 = Necessary protocols already installed |
|
|
| ||
|
| NetWare printer | |||
LPR Printer |
| with | C82357* | ||
| IPX/SPX | protocol | |||
|
| ||||
with C82357*
TCP/IP
w,
rf
!LL | !LL | !&ii= |
|
Windows 95 | Windows NT 3.51/NT 4.0 | Windows 95 | / |
EPSON TCP/IP | Windows NT LPR | NT 3.51 / NT 4.0 | |
Getting Started