This chapter explains certain requirements and setup procedures you need to follow to use EPSON Status Monitor 2.

System Requirements

Make sure your system meets the following system requirements before using EPSON Status Monitor 2.

Printers

EPSON Status Monitor 2 can work with EPSON printers that are connected to the network via an Ethernet Card:

0EPSON Stylus COLOR 800, EPSON Stylus COLOR 1520, EPSON Stylus COLOR 3000

0EPL-N1200, EPL-N2000

0FX-880, DLQ-3000+

As of June, 1997

Computers

This Status Monitor works with IBM® PC AT or compatible computers that are running Windows 95, Windows NT 3.51, or Windows NT 4.0.

Note:

If an incorrect network interface card driver is selected for your PC’s network interface card, your software may not operate properly. You should always use the latest network interface card driver supplied by the card’s manufacturer.

1-2 Getting Started