NetWare printers cannot be monitored.
Cause | What to do |
You are using EPSON Net!.
You cannot use EPSON Status Monitor 2 and EPSON Net! at the same time. Quit EPSON Net! and use EPSON Status Monitor 2. If you use EPSON Net!, quit EPSON Status Monitor 2 in advance.
NetWare print servers cannot be monitored beyond routers.
Cause | What to do |
The number of hops is set to 0.
Change the number of hops according to “Changing the Initial Settings” on page
An existing printer cannot be found in Windows NT 3.51. | I | |
Cause | What to do |
|
|
|
|
You may have logged on to the network before network modules were completely loaded.
Log on again. To clear this problem immediately after the operating system starts, log on after access to the hard disk drive is completed.
Tips and Troubleshooting 3 - 5