Macintosh OS 8.6 to 9.x

1

2

3

4

5

Make sure the Macintosh is properly connected to the network, then turn it on. Make sure the printer and print server are still on.

Put the EPSON Printer Software CD in your

CD-ROM or DVD drive.

Double-click the C84N CD-ROM icon on the desktop (if necessary).

Double-click the EPSON Installer icon.

You see the EPSON Installation Program window.

Double-clickInstall EPSON Stylus C84N

Printer Driver.

6 Follow the on-screen instructions to install the driver and restart your Macintosh.

Macintosh OS X

1 After your Macintosh restarts, open the Applications folder, then open the Utilities folder and double-click Print Center.

2 If there are no printers in Print Center,

you see a message like this one. Click Add.

If the Printer List window appears, Click Add.

3 Depending on your network, select either EPSON AppleTalk or EPSON TCP/IP from the pull-down list.

4 Select your printer, then select All from the Page Setup pull-down list.

5 Click Add. You see the Printer List window with the Stylus C84 Sheet Feeder - Borderless and Standard printer options.

NOTE: If you’re connecting over a TCP/IP network, your printer is identified by its IP address. To identify the printer’s IP address, see the status report you printed out in section 5, “Connect the Print Server.”

6 Close Print Center.

NOTE: Make sure you select your printer in the Print Setup dialog box in the applications you use.

7 Optionally, double-click the C84N CD-ROM icon on the desktop, and double-click EPSON Installer.

•Install the print movies and User’s Guide. To do this, double-click Install Printer Movies and User Guide (EPIC). Then double-click the EPSON Printer Info Center icon on the desktop to view the printer movies or User’s Guide.

•Install EPSON Software Film Factory, a photo management program. To do this, double-click Install EPSON Software Film Factory, and follow the on-screen instructions.

•View the print server Administrator’s Manual. To do this, double-click View Administrator’s Manual. If you don't have Adobe Reader, install it when prompted.

8 Click the icon to close the EPSON Installation Program window, then remove the CD-ROM from the drive.