Epson C88 manual Fourth step Set up the Continuous Ink Supply System, Fiveth step Fix Support Arm

Models: C88

1 8

Page 4

Circumgyrate screwdreiver	Separate the right side of	Take off the cover of cartridge-car
deasilly	cartridge-car

Remove original cartridge	Insert our no-sponge cartridge	Close the cover for cartridge
	into printer carefully

Tear off the sticker		Fix the arm on the 21cm right far from Tear off the sticker
	you printer

Fix the balance arm	Tear off the sticker of clamp	Attached the clamp on your printer
		and let it parallel with printer

Image 4

Contents

Installation Instruction For ST Prefilled Version With Auto Reset ChipsContinuous Ink Supply System for Epson Stylus C88 1、General Guide 2、Printer testingCIS for EPSON Stylus C88 Instruction 3、Installation Procedures 3）Third step Set up the Continuous Ink Supply System1 First step 2）Second step Remove cartridge4 Fourth step Set up the Continuous Ink Supply System 5 Fiveth step Fix Support ArmTake off the cover of cartridge-car Close the cover for cartridge6 Sixth step Install tubeline 7 Seventh Step Adjust the tubeline4、Reset Procedure 5、Refill Ink6. How to install the cover of cartridge 7、Attention for maintenancePls first install the left side of Then install the other side1. Not drinkable keep it out reach of children 6. Don’t sway the cartridge frequently. It may cause ink leakage3. Avoid collision and fallen down