36
R4C623
short.bk Rev_C
A5 size MAINT.FM
10/18/00 Pass 0
LProof Sign-off:
Ichihara _______
N.Nomoto _______
R.Thomson _______
Aligning the Print Head
If you notice a misalignm ent of vertic al lines, yo u may be able to
solve this problem using the Print Head Align ment utility in your
printer software. Follow the directions in the appropriate section
below.
Note:
Do not start the Print Head Alignment utility while printing is in
progress; otherwise, your printout may be marred.
For Windows users
Follow the steps below to align the print head.
1. Make sure that A4 or Letter size plain paper is loaded in the
sheet feeder.
2. Click the Utility tab in the printer driver, then click the Print
Head Alignment button.
3. Follow the on-screen instructions to align the print head.

For DOS users

Follow the steps below to align the print head.
1. Insert the printer software CD in your CD-ROM drive.
2. Type D:\SETUP at the DOS prompt. (If your CD-ROM drive
is assigned a drive letter other than "D", or if you are using the
floppy disk version, substitute the appropriate letter.)
3. Press the Enter key, then follow the on-screen instructions.
4. After running the setup program, type C:\EPCALIB2. (If your
hard drive is assigned a drive letter other than “C”, substitute
the appropriate letter.)