
2
R4C623
short.bk Rev_C
A5 size SAFE.FM
10/18/00 Pass 0
LProof Sign-off:
Ichihara _______
N.Nomoto _______
R.Thomson _______
❏Unplug the printer and refer servicing to qualified service
personnel under the following conditions:
The power cord or plug is damaged; liqui d has entered the
printer; the printer has been dropped or the cabinet damaged;
the printer does not operate normally or exhibits a distinct
change in performance.
❏If you plan to use the printer in Germany, the building
installation must be protected by a 10 or 16 amp circuit
breaker to provide adequate short-circuit protection and
over-current protection for this printer.
Note for German-speaking users:
Bei Anschluss des Druckers an die Stromversorgung muss
sichergestellt werden, dass die Gebäudeinstallation mit einer
10 A- oder 16 A-Sicherung abgesichert ist.
A Few PrecautionsRead the information in this section before using the printe r,
handling the ink cartridges, or choosing a location for the printer.
Using the printer
Observe the following when using the printer.
❏Do not put your hand inside the printer or to uch the ink
cartridges during printing.
❏Do not move the print head by hand; otherwise, you may
damage the printer.
❏Always turn the printer off using the P power button. When
this button is pressed, the P power light flashes briefly and
then goes off. Do not unplug the printer or turn off the power
to the outlet until the P power light stops flashing.
❏Before transporting the printer, make sure that the print head
is in the home (far right) position and that the ink cartridges
are in place.