Creating a Color Profile
To make a color profile, you must use the calibration sheet you printed in the previous section. Make sure your Color Calibrator has been calibrated as described in “Calibrating the EPSON Color Calibrator” on page
1.Place the calibration sheet you printed in the previous section on a flat surface, with the included black base paper behind it.
Note:
Wait for at least 30 minutes after printing a calibration sheet before using it to create a color profile.
2.Select an empty block in the EPSON Printer Calibrator dialog box by clicking it with your mouse.
3.Place the sensor tip of the calibrator on the corresponding block of the calibration sheet.
Note:
Make sure the sensor tip is placed flat and firmly on the sheet.