Safety Instructions
Read these instructions before using your Color Calibrator, and save them for later reference. Follow all warnings and instructions in this User’s Guide.
❏Unplug the AC adapter before cleaning. Clean with a damp cloth only. Do not spill liquid on the calibrator.
❏Do not place the calibrator on an unstable surface, or near a radiator or heat source.
❏Do not insert objects into the sensor tip.
❏Use only the type of power source indicated on the AC adapter’s label.
❏Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.
❏Do not let the power cord become damaged or frayed.
❏If you use an extension cord with the AC adapter, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating.
❏Do not attempt to service the products yourself.
❏Unplug the AC adapter and refer servicing to qualified service personnel under the following conditions:
❏If the power cord or plug is damaged; if liquid has entered the AC adapter; if the AC adapter has been dropped or the cabinet damaged; if the AC adapter does not operate normally or exhibits a distinct change in performance. (Do not adjust controls that are not covered by the operating instructions.)
2Introduction