Paper doesn’t feed . . .

Remove the stack of paper from the sheet feeder. Check that the paper:

■Isn’t curled or creased

■Isn’t too old

■Isn’t loaded above the arrow on the left edge guide

■Isn’t jammed inside the printer. (If the S paper out light is flashing, paper is jammed.)

Then reload the paper as described on page 12, making sure the left edge guide is adjusted to fit the paper’s width.

Paper jams inside the printer . . .

Turn off your printer, open the cover, and remove all the paper that’s inside, including any small pieces that may have torn off.

Reload the paper as described on page 12. If your paper jams frequently, make sure you:

■Use smooth, high-quality paper, loaded printable side up.

■Fan the stack and then even the edges before loading it.

■Don’t load paper above the arrow mark on the left edge guide.

■Place the paper against the right edge guide and adjust the left edge guide to fit the width of your paper.

Multiple pages feed at the same time . . .

Remove the stack of paper from the printer.

■Make sure the paper isn’t too thin.

■Fan the edges of the stack of paper to separate the sheets.

■Reload the paper as described on page 12.

■Make sure the edge guides are snug against the edges of the paper.

■If too many copies are printing, check the Copies settings in both the printer software and your application program.

Solving Miscellaneous Printout Problems

The margins are incorrect . . .

■Make sure the paper settings are correct for your paper size.

■Check your software documentation for instructions on selecting the correct margins for your paper size. Make sure the margins are within the printable area of the page. See “Specifications” in your electronic EPSON Stylus COLOR 660 Reference Guide for more information.

51