To set up a Macintosh as a client on a network using the EPSON Stylus RIP, your system must have the following minimum configuration:

•Macintosh Centris,® Macintosh Quadra,® Performa,® Power Macintosh G3 series, or iMac series

•Ethernet AppleTalk® connection to the Macintosh set up as the EPSON Stylus RIP print server

•16MB RAM (32MB or more recommended)

•At least 2MB of free hard disk space to install the software and at least 150MB of free hard disk space for processing large files

•Macintosh System 7.6.1 or later

•CD-ROM drive

Windows System Requirements

To use your printer in either a standalone or peer-to-peer network environment, your system should include:

•IBM®-compatible PC with 486 or higher processor (Pentium® 133 MHz or higher recommended)

•Windows 3.1, 95, 98, or NT 4.0

NOTE:

EPSON Stylus RIP is not supported in Windows 3.1.

•At least 16MB of RAM (32MB or more recommended)

•At least 50MB of free hard disk space to install the software and at least 150MB of free hard disk space for processing files (more for large files)

•CD-ROM drive

•An available parallel port configured as LPT1

3