Basic Faxing (Fax Model Only) 14
EPSON AcuLaser CX11 Series Basic Operation Guide
4. Press the uUp or dDown button
several times until your desired group is
selected, then press the rRight button.
The selected group appears in the
second top row in the LCD panel.
Note:
To display the details of the registered group,
press the Advanced/Menu button while
a group is selected. To return to the group
list again, press either the
Advanced/Menu button or the lLeft
button.
5. Make the appropriate settings for your
scanning purpose if necessary.
Note:
When you press the xB&W Start button
without making any settings here, the fax
transmission starts with the existing setting
values.
6. Press the xB&W Start button to start the
transmission.
Receiving faxes

Basics of receiving faxes

When the product has an attached phone,
you can select from four reception modes for
receiving a call. The default is set to the Fax
only mode.
To change the reception mode, follow the
steps below.
1. Press the Setup button on the
control panel.
The Setup light is lit and the Setup me nu
appears in the LCD panel.
Setting item Description
Auto
switching
The call is received by the
attached phone and the
product automatically answers
after the phone rings for a
certain duration specified by
the Attached Phone Timeout
setting.
Fax only The product automatically
answers and receives the fax.
Phone only The call is received by the
attached phone. Fax
reception is not performed.
TAM When an attached phone
detects a fax/phone signal
while answering an incoming
call, the product automatically
receives the fax.