Epson AcuLaser CX11N/CX11NF

Paper

Single sheets

 

Size

A4 (8.3 × 11.7 inches)

 

A5 (5.8 × 8.3 inches)

 

A6 (4.1 × 5.8 inches)

 

Letter (8.5 × 11 inches)

 

Legal (8.5 × 14 inches)

 

Half-letter (5.5 × 8.5 inches)

 

Executive (7.3 × 10.5 inches)

 

User Defined up to 8.66 × 14 inches

Paper type

Plain bond paper or special paper

 

distributed by Epson

Thickness

0.003 to 0.004 inch (0.08 to 0.11 mm)

Weight

17 lb (64 g/m²) to 24 lb (90 g/m²)

 

(for plain bond paper)

Envelopes

 

Size

No. 10 (4.1 × 9.5 inches)

 

DL (4.3 × 8.7 inches)

 

C6 (4.5 × 6.4 inches)

 

MON

 

C5

 

IB5

Paper type

Plain bond paper

Weight

20 lb (75 g/m²) to 24 lb (90 g/m²)

Note: Poor quality paper may reduce the print quality and cause paper jams or other problems. If you have print quality problems, switch to a higher grade paper.

Do not load curled or folded paper.

Use paper only under these conditions:

Temperature: 59 to 77 °F (15 to 25 °C)

Humidity: 40 to 60% RH

Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always test a sample of paper stock before purchasing large quantities or printing large jobs.

Always load paper into the sheet feeder with the short edge first. Load envelopes flap edge left with the printable side up.

Loading Paper

You can load paper in the MP (multi-purpose) tray or the optional paper cassette tray. All printed materials are output to the output tray, shown on page 5.

Using the MP Tray

1.Open the MP tray cover.

2.Pinch the knob and paper guide together, then slide the right paper guide outward.

MP tray cover

3.Load a stack of paper in the center of the tray with the short edge first and the printable surface facing up. Pinch the knob and the paper guide together and slide them against the right side of the stack for a snug fit.

Note:

When loading paper, do not exceed the maximum stack height marker inside the paper guide.

4. Close the MP tray cover.

Note:

After loading paper, press the Setup button on the control panel, press the r button to select Printer Settings, press the

dbutton to select Tray Menu, and match the MP Tray Size and MP Type settings to the loaded paper size.

4 - Epson AcuLaser CX11N/CX11NF

8/05