Epson Stylus CX4200 Series/Epson Stylus CX4800 Series

For multiple index sheets, the pages containing the most recent images are printed first. If you want to cancel printing more sheets, press the y Stop button.

Now follow the instructions below to select photos and print.

Selecting Photos on the Index Sheet

1.Once you have printed the index sheet, use a dark pen or pencil to fill in one of the ovals beneath each photo you want to print to indicate how many copies you want (1, 2, or 3).

OK:

No good:

Make sure just one oval is filled in for each selected photo and mark the sheet carefully; once it has been scanned you will not be able to change your selections.

Note:

If you want one copy of all the photos on the index sheet, fill in the ALL oval at the top of the page.

2.Place the index sheet face-down on the glass, in the upper left corner, so that the top of the sheet is aligned against the left edge of the glass.

3.Close the document cover.

4.Load up to 100 sheets of plain paper or up to 20 sheets of photo paper at a time (see page 4 for details). You can load more paper later as necessary to print all your selected photos.

5. Make sure the Print From Index Sheet light is on.

6. Select Plain Paper or Photo Paper (whichever you loaded).

If you select Plain Paper, the photo(s) print with a white border. If you select Photo Paper, the photos print borderless, to the edge of the paper.

7. Select Letter, 4”x 6”, or 5”x 7” for the paper size.

8. Press the x Start Color button to start printing.

Note:

If you need to stop printing, press the y Stop button.

9.When you are done printing, remove the memory card by pulling it straight out of its slot.

Printing All Photos or DPOF Photos

Follow the steps below to print one copy of each photo on the card or to print only those photos that were pre-selected with your camera’s DPOF feature.

1.Insert the memory card (see page 9).

2.Load up to 100 sheets of plain paper or up to 20 sheets of photo paper at a time (see page 4 for details). You can load more paper later as necessary to print all your photos.

3. Press the Memory Card button until the Print All/DPOF/PictBridge light comes on.

Note:

If the memory card does not contain DPOF information, one copy of all the photos on the card will be printed.

4.Select Plain Paper or Photo Paper

(whichever you loaded).

If you select Plain Paper, the photo(s) print with a white border. If you select Photo Paper, the photos print borderless, to the edge of the paper.

5.Select Letter, 4”x 6”, or 5”x 7” for the paper size.

6.Press the x Start Color button to start printing.

Note:

If you need to stop printing, press the y Stop button.

7.When you are done printing, remove the memory card by pulling it straight out of its slot.

10

5/05