Epson Stylus CX4200 Series/Epson Stylus CX4800 Series
Caution:
Do not move the print head by hand; this may damage the Epson Stylus CX. Always press the B ink button to move it.
4.Press the B ink button again.
❏If more than one cartridge is empty or low, the next cartridge moves to the _ ink out mark.
❏Once the Epson Stylus CX has identified all of the empty or low ink cartridges, the print head moves to the ink cartridge replacement position.
5. Open the cartridge cover.
6.Squeeze the tab at the back of the cartridge and lift it straight out. Dispose of it carefully. Do not take the used cartridge apart or try to refill it.
7.Before you open the new ink cartridge package, shake it four or five times. Then remove it from the package.
Caution:
Do not touch the green chip on the front of the cartridge. This can damage the ink cartridge.
8.Place the new ink cartridge into the cartridge holder and push it down until it clicks into place.
9.Replace any other cartridges that need to be replaced.
10.Close the ink cartridge cover and press it until it clicks into place.
Warning:
If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water.
5/05 | 15 |