The tube is excessive long, it The tube is twist ,it is not ok. In this situation ,it is ok
is not ok.
7)、The seventh step
Stick the support arm at the Insert the electrical source Power on the printer to check
Position as show in the picture line suitably whether the printer works well
For conveniently uphold the cover.
8)、The eighth step: Checking the printing head
Normal
Nozzle check is normal, start printing
Abnormal
Pls clean printing head
Enter this item
If there show breaks, please clean your printing head. It is possible that the wispy air
have entered into the printing head. If it is still show little breaks specially show in
one color, it no need to repeatedly continue to clean. Just keep the printer silent for
about one hour, it may disappear. If after testing, it still abnormal, please kindly to
contact with local dealer.
4、Reset Procedure: