Epson CX4200 connector (Pic.A) ; Turn on the power (Pic B). Watch for anything unusual.

7、Step Seven: Adjusting the Tube
Adjust the tube length and move the cartridge car. Insure there will no block and collision when the tubes
moving with cartridge car .Insure there's plenty length of tube to make the cartridge cart can thoroughly
move to the left side.
The tube is excessive long, it The tube is twist ,it is not ok. In this situation ,it is ok
is not ok.
8、Step Eight: Install the clamp like the Picture Shown(Pic A),Plug the power
connector (Pic.A) ; Turn on the power (Pic B). Watch for anything unusual.
A B C