Important Safety Instructions

Before using your EPSON Stylus CX5400, read and follow these safety instructions:

■Be sure to follow all warnings and instructions marked on the Stylus CX.

■Use only the type of power source indicated on the Stylus CX label.

■Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as air control systems or other high-load devices that regularly switch on and off.

■Place the Stylus CX near a wall outlet where the plug can be easily unplugged. Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée facilement.

■Do not let the power cord become damaged or frayed.

■If you use an extension cord with the Stylus CX, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord’s ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet’s ampere rating.

■Avoid electrical outlets controlled by wall switches or automatic timers.

■Keep your Stylus CX and computer system away from potential sources of electromagnetic interference, such as loudspeakers or cordless telephone base units.

■Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust.

■Leave enough room around the Stylus CX for sufficient ventilation.

■Do not place the Stylus CX near a radiator or heating vent or in direct sunlight.

■Place the Stylus CX on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle. Leave enough space in front of the Stylus CX (at least 9 inches) so it doesn’t tip forward and fall off of the work surface.

■Turn off and unplug the Stylus CX before cleaning. Clean with a damp cloth only. Do not spill liquid on it.

Caution: Always turn the Stylus CX off using the On button. Don’t turn off the power using a switch on a power strip or unplug the Stylus CX until the On light is off.

■Do not block or cover openings in the Stylus CX case or insert objects through the slots.

■Except as specifically explained in your documentation, do not attempt to service the Stylus CX yourself.

34