Epson Stylus CX5800F

Placing Originals for Copying, Scanning, or Faxing

Caution:

Do not place heavy objects on the document table glass and do not press the glass with too much force.

1.Open the document cover and place your original face- down on the glass, in the upper left corner. Move your original about 0.04 inch (1 mm) away from the top and left edges so all of it will be scanned.

Placing Large or Thick Documents

When you scan a large or thick document, you can remove the document cover. Just open it and pull it straight up.

If you need to press the document flat while you copy or scan it, do not press too hard and be careful not to move it.

Caution:

Do not use excessive force on the document cover, and do not twist it diagonally. You may damage the document cover.

When you are done, replace the document cover by inserting the tabs back into the slots.

2.Close the document cover gently so that your original does not move.

Caution:

Never open the document cover beyond where it stops.

If you need to clean the document table glass, wipe it gently with a soft cloth. Do not spray glass cleaner on the glass.

Copying

Using the Epson Stylus CX5800F buttons, you can make copies using either letter-size (8.5 × 11-inch) plain paper, or letter-size, 4 × 6-inch, or 5 × 7-inch photo paper.

Copying a Document

1. Press the P On button to turn

 

 

on the Epson Stylus CX5800F.

 

 

12:00 PM

Y

You see a screen like this:

 

 

2.Place the document on the glass as described in the left column. Be sure to close the document cover.

3.Load up to 100 sheets of letter-size plain paper. See page 4 for details.

4.Press the Copy button. You see this display:

5.If you want your copies automatically reduced or enlarged to fit the loaded paper size (Fit to Page mode), press the Copy button again. The display changes to this:

Copies:1 100%

Copies:1 FitPage

6.To make multiple copies (up to 99), press the number keys on the numeric keypad. The display shows the number you select.

8/05

7