Screen display

Cause

Solution

 

 

 

 

The paper thickness lever

If you have set the lever to the

 

is set to the ^ H position.

^ H position because you are printing

 

 

envelopes, press x Start to continue.

 

 

Otherwise, set the lever to the

 

 

m L position.

 

 

 

 

An CX6000 Series part

Contact your local authorized servicer or

 

needs to be replaced.

contact Epson for a referral; see page 46.

 

 

 

 

There is a problem with the

Turn the CX6000 Series off and then back

 

CX6000 Series.

on. If the error does not clear, contact your

 

 

local authorized servicer or contact Epson

 

 

for a referral; see page 46.

 

 

 

 

 

 

 

 

 

Problems and Solutions

Check the solutions below if you’re having trouble using your Epson Stylus CX6000 Series all-in-one.

Printing and Copying Problems

■Make sure your original is positioned in the top left corner of the glass. If the edges are cropped, move your original away from the edges slightly.

■Make sure your paper is loaded short edge first and is positioned against the right edge guide with the left edge guide against its left side. Don’t load paper above the arrow mark inside the left edge guide.

■Make sure the paper size settings are correct for the paper you loaded.

44Solving Problems