Epson CX7300 manual Chip Reset, Check the nozzle

Step 9: Check the nozzle

Nozzle is ok

Print test lines. If it is OK, then you can begin using.

Broken Lines

If there is broken lines, then pls clean the printer head.

Enter Checking Nozzle Panel

Broken lines may be caused by air entering the nozzles. If there is still some broken lines after cleaning printer head repeatedly, especially for single color, then you can leave the printer for about 1 hour. Then the broken lines may disappear. If there is still such problem, then pls contact local dealer.

4. Chip Reset

If ink-lacking light of the printer is flashing, it is aimed to remand you to change the cartridges.

Press ink-changing button two times until the carriage stops at the ink-changing place.