List of Functions 48
fNotes on operating the network menu
Selecting from the top menu and sub menus, and changing of selected
items are the same as operations in the configuration menu.
When done, make sure you go to the "Complete menu", and select one of
"Yes", "No", or "Cancel". When you select "Yes" or "No", you return to
the configuration menu.
fSoft keyboard operations
The network menu contains items that require input of alphanumerics
during setup. In this case, the following software keyboard is displayed.
Use the [ ] button on the remote control or [ ], [ ],
[ ], and [ ] on the projector to move the cursor to the desired
key, and then press the [Enter] button to enter the alphanumeric. Enter
figures by holding down the [Num] button on the remote control, and
pressing the numeric buttons. After inputting, press [Finish] on the
keyboard to confirm your input. Press [Cancel] on the keyboard to cancel
your input.
Yes: Saves the settings and exits the network menu.
No: Exits to the network menu without saving the settings.
Cancel: Continues displaying the network menu. Each time this key is selected, it
sets and changes between upper
case and lower case letters.
Each time this key is selected, it
sets and changes the symbol
keys for the section enclosed by
the frame.