You can save the image that is currently being projected as a User's Logo.
q
Once a User's Logo has been saved, the logo cannot be returned
to the factory default.
Procedure
A
Project the image you want to use as the User's Logo, and
then press the [Menu] button.
Using the Remote Control Using the Control panel
B
Select Extended - User's Logo from the Configuration Menu.
s "Using the Configuration Menu" p.48
Check the buttons you can use and the operations they perform
in the guide under the menu.
q
•If User's Logo Protect from Password Protect is set to On, a
message is displayed and the user's logo cannot be changed. You
can make changes after setting User's Logo Protect to Off.
s p.37
•If User's Logo is selected when Keystone, E-Zoom or Aspect is
being performed, the function currently being performed is
cancelled.
C
When "Choose this image as the User's Logo?" is displayed,
select "Yes".
q
When you press the [Enter] button on the Remote Control or the
Control panel, the screen size may change according to the signal
as it changes to the resolution of the image signal.
D
Move the box to select the part of the image to use as the
User's Logo.
Saving a User's Logo
80