12
Parts Name and Functions
Name Function
ASlide lens cover knob. Slide the knob to open and close the slide lens cover.
BSlide lens cover Close the lens cover to protect the lens when the unit is not in use.
You can stop the projection completely by closing the lens cover during projection. However, if
this state continues for 30 minutes, the unit lamp is turned off automatically. sp. 18
CDisc indicator Lights up green when a disc is inserted into the disc slot. sp. 19
DEject button Press this button to eject a disc from the disc slot. sp. 22
EDisc slot Insert a disc you wish to play. sp. 19
FFoot adjust lever Press the Foot adjust lever to extend and retract the Front adjustable foot. sp. 21
GFront adjustable foot The feet on the side of the projection lens can be extended by turning them. Extending the feet to
the maximum extent tilts this unit by approximately 10 degrees. sp. 21
HHeadphone jack Connects a headphone to the unit. sp. 52
IHandle (Security cable
installation point)
Hold this handle when carrying the unit. sp. 9
Pass a commercially available wire lock through here and lock it in place.sp. 66
JSecurity slot (j)The Security slot is compatible with the Microsaver Security System manufactured by Kensington.
sp. 66
KAir intake vent
(Air filter cover)
Take the cooling air into the unit. If dust collects on the air intake vent it can cause the internal
temperature of the unit to rise, and this can lead to operation problems and a shortening of the
service life of optical parts. Clean it periodically. sp. 72
LRemote control light-
receiving area
Receives signals from the remote control. sp. 16
MProjection lens Projects an image.

Front

H
I
L
M
B
D
C
E
F
G
A
K
J
F