34
Configuration Menu Functions
If this is set to "On", you can't operate the projector's control panel buttons and a icon appears on the
screen when a button is pressed. To cancel, press and hold on the projector's control panel for about
seven seconds or more.
If you change the setting, the new setting will take effect after exiting the configuration menu.
This sets the trigger out function which communicates information such as the power on status of the
projector to external equipment.
If you change the setting, the new setting will take effect after the power has been turned off and the cool-
down period is complete.
A fan is set at a certain speed of rotation so as to bring down internal temperature.
When using above an altitude of about 1500m, set to "On".
This should be set in accordance with the method used to set up the projector.
• Front : Select when the projector is set up in front of the screen.
• Front/Ceiling : Select when the projector is set up in front of the screen and suspended from a ceiling.
• Rear : Select when the projector is set up behind the screen.
• Rear/Ceiling :
Select when the projector is set up behind the screen and suspended from a ceiling.
If the light from or becomes bothersome while watching a movie or the like in a dark room,
turn this setting to "Off".
Press , , and to specify the position for the menus to be displayed.
Selects the color for the main configuration menu.
• Color 1:Black
• Color 2:Blue
This sets whether the following message displays appear (On) or don't appear (Off).
• Image signal, color mode, aspect and item name when memory settings are retrieved.
• Messages such as when no image signals are being input, when an incompatible signal is input, and
when the internal temperature rises.
Displays a menu for selecting the screen status for when using the blank function or when no image
signal is input.
This sets whether the start-up screen (the image that is projected when projection starts) is displayed (On)
or not displayed (Off).
If you change the setting, the new setting will take effect after the power has been turned off and the cool-
down period is complete.
Sets whether the standby confirmation message is displayed (On) or not displayed (Off).
Control Panel Lock
Trigger Out
High Altitude Mode
Projection
Illumination
Display
Menu Position
Menu Color
Messages
Display Background
Startup Screen
Standby Confirmation