Safety Instructions

Follow these safety instructions when setting up and using the projector:

1 . Do not place the projector on an unstable cart, stand, or table.

2 . Do not use the projector near water or sources of heat.

3.Use attachments only as recommended.

4.Use the type of power source indicated on the projector. If you are not sure of the type of power available, consult your dealer or local power company,

5.Insert the projector’s three-wire grounding-type plug into a properly grounded outlet. If you have a two-prong outlet, contact an electrician to replace it.

6.Do not overload wall outlets, extension cords, or integral convenience receptacles. This can cause fire or electric shock.

7 . Do not place the projector where the cord can be walked on.

8.Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

9.Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Do not put the projector on a sofa, rug, or other soft surface or in a built-in installation unless proper ventilation is provided.

xiiIntroduction