Connecting to an External Speaker or PA System

For most small-or medium-sized rooms, the projector’s internal speakers are sufficient. If you need extra amplification for a large room, you can connect the projector to an external amplified speaker or PA system.

To connect the projector to an external sound system, you need to obtain an RCA- to-3.5mm Stereo audio cable. You can get one from your computer dealer.

Before beginning, turn off the projector and the speaker or PA system,

1.Connect the cable’s 3.5mm stereo miniplug into the projector’s Audio Out jack.

2.Connect the RCA plug to the external amplified speaker or PA system. Insert the cable’s red plug into the R side, and the white plug into the L side.

You should now adjust the Fade menu setting. See page 39.

14

1 • Installation