Press the [Menu] button on the document camera or remote control to
view the on-screen menu.
You see this screen:
Use the [ ] [ ] [ ] [ ] arrow buttons to navigate the menu and adjust
the settings. Press [Enter] to select a setting. When you're done adjusting
the settings, press the [Menu] or [Esc] button to close the menu and save
your settings.
Making Image Adjustments
Basic image adjustments such as focus, zoom, and brightness are discussed
in "Displaying a Document or Other Materials" p.22. You can make these
further adjustments by pressing the [Menu] button to open the Image
menu:
•White Balance
Adjusts the image color based on the lighting in the room where you're
presenting. Select from Auto (to adjust the image automatically),
Fluorescent (to lessen blue tones), or Incandescent (to lessen yellow
tones).
•Focus
Lets you manually adjust the focus if the auto-focus doesn't produce a
sharp enough image.
•High Contrast
Select On to increase the visibility of a faint or low-contrast image.
•Color/B&W/Negative
Displays the image in color or black-and-white. To show a photographic
negative in true color, select Negative.
•Image Rotation
Lets you rotate an upside-down image. You can also use the image
rotation dial on the camera head. s p.22
•Output Resolution
Lets you manually select XGA, WXGA, or SXGA when the projector's
format cannot be automatically detected. Use if you see black bars on
the screen or the image is stretched.
•Microscope
Optimizes the brightness, contrast, and other settings for use with a
microscope. s p.23
•Reset
Lets you return the image settings to their standard (default) values.
Using the On-screen Menu27