Appendices > Projector Care
CLoosen the fixing screws holding the lamp in place.
DRemove the old lamp.
EInstall the new lamp.
Press the lamp until it clicks into place, then tighten the two fixing screws.
58
FReplace the lamp cover.
First insert the tabs, and then press down on the opposite side until it clicks into place.
• Install the lamp securely. If the lamp cover is removed, the p lamp turns off automatically as a safety precaution. The
lamp will not turn on if the lamp or the lamp cover is not installed correctly.
•After replacing the lamp, be sure to reset the lamp operating time.
•New air filters are included with replacement lamps. The air filter should also be replaced when the lamp is replaced. s "Lamp replacement period" P.57
•The lamp contains mercury. Dispose of used lamps properly in accordance with your local regulations.
